SMT Nozzles 0.7mm, 1.0mm, 1.3mm, 1.8mm, 2.5mm, 3.7mm, 5.0mm, 7.0mm, 10.0mm, 15.0mm, 2.5G, 3.7G, 5.0G, 10.0G, 15.0G, 1.3M, 1.8M, 2.5M for Fuji XP-341 Placement Machine

The Pick-and-place Nozzle 0.7mm, 1.0mm, 1.3mm, 1.8mm, 2.5mm, 3.7mm, 5.0mm, 7.0mm, 10.0mm, 15.0mm, 2.5G, 3.7G, 5.0G, 10.0G, 15.0G, 1.3M, 1.8M, 2.5M are suitable for your Fuji XP-341 Placement Machine:

SMT Nozzle 0.7mm - Part Number: ADEPN8530.
SMT Nozzle 1.0mm - Part Number: ADEPN8540.
SMT Nozzle 1.3mm - Part Number: ADEPN8550.
SMT Nozzle 1.8mm - Part Number: ADEPN8560.
SMT Nozzle 2.5mm - Part Number: DEPN3060.
SMT Nozzle 3.7mm - Part Number: DEPN3070.
SMT Nozzle 5.0mm - Part Number: DEPN3080.
SMT Nozzle 7.0mm - Part Number: DEPN3090.
SMT Nozzle 10.0mm - Part Number: DEPN3100.
SMT Nozzle 15.0mm - Part Number: DEPN3110.
SMT Nozzle 2.5G - Part Number:
SMT Nozzle 3.7G - Part Number:
SMT Nozzle 5.0G - Part Number: AGFPN8460 AGFPN8540.
SMT Nozzle 10.0G - Part Number: AGFPN8480 AGFPN8540.
SMT Nozzle 15.0G - Part Number: .
SMT Nozzle 1.3M - Part Number: ADNPN8460 ADNPN8346.
SMT Nozzle 1.8M - Part Number: ADNPN8470 ADNPN8356.
SMT Nozzle 2.5M - Part Number: ADNPN8480 ADNPN8366.
- The nozzle head is made of ceramic, metal and plastic. The nozzle has been verified for long-term use. The nozzle head is not easy to whitish, the wear resistance is very good, and the suction process will not generate static electricity and will not stick materials. The vacuum value reaches the original factory level, and the normal service life is more than 24 months.
- The nozzle body is made of imported high-quality steel, the surface is coated with diamond film to black, and the specific part is implanted with a two-dimensional identification code. The absorption rate during the absorption process is 99.99%.
- SMT Nozzles for Fuji XP-341 Placement Machine - Every detail is carefully polished from inside to outside.