Pick-and-place Nozzles 500, 501, 502, 503, 504, 505, 509, 510, 511 are suitable for your Juki Placement Machine KE-2010 / KE-2020 / KE-2030 / KE-2040 / KE-2050 / KE-2060 / KE-2070 / KE-2080 / KE-3010 / KE-3020 / FX-1 / FX-1R / FX-2 / FX-3 / JM-10 / JM-20 / JM-50 / JM-100 / JX-100 / JX-200 / JX-300LED / JX-350:

SMT Nozzle 500 - external diameter 1.0 mm x 0.5 mm, inner diameter 2 mm x 0.4 mm
SMT Nozzle 501 - external diameter 0.7 mm x 0.4 mm, inner diameter ø0.25 mm
SMT Nozzle 502 - external diameter ø0.7 mm, inner diameter ø0.4 mm
SMT Nozzle 503 - external diameter ø1.0 mm, inner diameter ø0.6 mm
SMT Nozzle 504 - external diameter ø1.5 mm, inner diameter ø1.0 mm
SMT Nozzle 505 - external diameter ø3.5 mm, inner diameter ø1.8 mm
SMT Nozzle 509 - external diameter 0.2 mm x 0.4 mm, inner diameter ø0.1 mm

- The nozzle mouth part (500/501/502/503/504) is made of diamond and ceramic, which is durable and not whitish. (- The Juki 505 Nozzle mouth part is made of antistatic rubber and plastic materials, which has strong toughness and wear resistance.)
- The Juki CX-1 Nozzle (500, 501, 502, 503, 504, 505, 509, 510, 511) reflector is made of green plastic steel, which can be used interchangeably with the original nozzle without any error.
- The Juki CX-1 SMT Nozzle (500, 501, 502, 503, 504, 505, 509, 510, 511) Ontology is made of high-quality imported steel after high temperature treatment, which is durable.
- The Juki CX-1 Nozzle (500, 501, 502, 503, 504, 505, 509, 510, 511) positioning cover is processed by wire cutting, with smooth matching and not easy to wear.
- Juki CX-1 (500, 501, 502, 503, 504, 505, 509, 510, 511) nozzle seat - Every detail is carefully polished from inside to outside.
- The Juki CX-1 nozzle (500, 501, 502, 503, 504, 505, 509, 510, 511) is suitable for the installation of components such as suction resistance-capacitance, switch button, lamp bead, diode, USB interface, lens, camera, etc.